For H-beam specifications
● Flap width: 200-800mm
● Web height: 200-2000mm
(If the height of the web plate is less than 350mm, replace the small pressure roller, and the thickness of the wing plate should not exceed 20mm)
● Thickness of wing plate: 8-60mm
● Thickness of web: 8-40mm
● Material: Q345
Corrective Ability Chart
B/T |
200 |
250 |
300 |
350 |
400 |
450 |
500 |
550 |
600 |
650 |
700 |
750 |
800 |
8-15 |
|
|
|
|
|
|
|
|
|
|
|
|
|
15-19 |
|
|
|
|
|
|
|
|
|
|
|
|
|
19-22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
22-25 |
|
|
|
|
|
|
|
|
|
|
|
|
|
25-28 |
|
|
|
|
|
|
|
|
|
|
|
|
|
28-32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
32-36 |
|
|
|
|
|
|
|
|
|
|
|
|
|
36-40 |
|
|
|
|
|
|
|
|
|
|
|
|
|
40-45 |
|
|
|
|
|
|
|
|
|
|
|
|
|
45-50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
50-60 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(T is the thickness of the wing plate, B is the width of the wing plate) The shaded part in the table indicates that the correction requirements can be met
Technical Parameters
● Main pressure roller top force: 1500KN
● Transmission torque: 40KN.M
● Correction speed: 5.2m/min
● Hydraulic system pressure: 18 (lifting cylinder)/11Mpa (hydraulic motor)
● Hydraulic power: 18.5KW
● Total machine power: 18.5KW
● Front and rear rollers (with hydraulic lift): 12.5M each
● The total weight of the machine tool: about 20T (the main engine weighs about 17 tons)
● Applicable temperature: 0-450C
● Power supply: 380V 50HZ 3HP
Scope of delivery and components
● Rack assembly Including: base, left and right walls, etc.
● Alignment mechanism Including: 2 sets of web alignment mechanism.
● Front and rear rollers Including: front and rear rollers are 12.5 meters each, of which hydraulic floating rollers are 8 meters each.
● Hydraulic lift correction transmission system Including: main hydraulic cylinder, main transmission wheel, universal coupling, gear reducer, hydraulic motor, etc.
● Upper pressure roller and adjustment device Including: upper pressure roller (340mm) and 1 set of hydraulic adjustment device.
● Hydraulic system Including: oil tank, hydraulic valve, oil pipe joint, etc.
● Electrical system Including: lift position display device, motor, electric control and operation panel.